Omaa Metal Sources is Series B Flanges Exporters and Suppliers in the US, UK, South Africa, Saudi Arabia, Singapore, UAE, Oman, South Korea, Turkey, Bahrain, Malaysia, Philippines, Thailand, Norway, Indonesia, Iraq, Yemen, Bangladesh, Nigeria, Egypt, Peru, Ghana, Morocco, Etc.
Series B weld neck Flange, Series B Plate Flange, Series B slip on Flanges Supplier, ANSI B16.47 Series B Threaded Flanges, ANSI B16.47 Series B Class 300 Socket Weld Flanges, Series B Spectacle blind Flanges Manufacturer in India.
A Series B flange refers to a specific type of flange used in piping and plumbing systems. It is a type of raised face flange that conforms to the ASME B16.47 standard, which specifies dimensions and tolerances for flanges in a range of sizes and pressure classes.
The Series B flange is designed for use in applications that require higher pressure ratings than those covered by Series A flanges. It is typically used in large diameter piping systems and is available in sizes ranging from 26 inches to 60 inches.
Series B flanges are commonly used in the oil and gas, petrochemical, and power generation industries, among others. They are typically made from materials such as carbon steel, stainless steel, or alloy steel, depending on the specific application requirements.
![Series B Flanges Series B Flanges Supplier](https://www.omaaforged.com/wp-content/uploads/images/series-b-flanges.jpg)
Suppliers of Series B Welding Neck Flange, Check Sizes And Dimensions Of Series B Forged Flanges, Ready Stock of Series B Socket Weld Flange, ASME B16.47 Class 300 Series B Ring Type Joint Orifice Flange, ANSI B16.47 Series B Blind Flanges.
Series B Flange Specifications
Size Range
1/2" (15 NB) to 48" (1200NB) DN10~DN5000
Class / Pressure Rating
150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.
Standards / Dimensions
ANSI/ASME B16.5, B16.36, B16.48, BS4504, BS 10, EN-1092, DIN, BS, GOST, MSS SP-44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605
Connection Type
Ring Joint Flange (RTJ), Flat Face Flange (FF), Raised Face Flange (RF), Male and Female Flange (M & F), Lap Joint Flange, Large and Small Tongue-and-Groove Flange (T & G)
Series B Flanges Dimensions
ASME B16.47 Series B Class 75 Flange Dimenisons | ASME B16.47 Series B Class 150 Flange Dimenisons |
ASME B16.47 Series B Class 300 Flange Dimenisons | ASME B16.47 Series B Class 400 Flange Dimenisons |
ASME B16.47 Series B Class 600 Flange Dimenisons | ASME B16.47 Series B Class 900 Flange Dimenisons |
![ASME B16.47 SERIES B CLASS 75 FLANGE DIMENSIONS](https://www.omaaforged.com/wp-content/uploads/images/asme-b-16-47-series-b-flange-dimensions.jpg)
Nominal Size | Outside Diameter (OD) | Min. Thickness [Note1] – WNF (tf) | Min. Thickness [Note1] – Blind (tf) | Length Through Hub (Y) | Hub Dia. Base [Note2] (X) | Hub Dia. Top (A) | Raised Face Dia. (R) | Drilling – Bolt Circle Dia. | Drilling – No. of Bolt Holes | Drilling – Dia. of Bolt Hole | Dia. of Bolt | Min. Fillet Radius (r1) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
26 | 30.00 | 1.25 | 1.25 | 2.25 | 26.62 | 26.06 | 27.75 | 28.50 | 36 | 3⁄4 | 5⁄8 | 0.31 |
28 | 32.00 | 1.25 | 1.25 | 2.38 | 28.62 | 28.06 | 29.75 | 30.50 | 40 | 3⁄4 | 5⁄8 | 0.31 |
30 | 34.00 | 1.25 | 1.25 | 2.50 | 30.62 | 30.06 | 31.75 | 32.50 | 44 | 3⁄4 | 5⁄8 | 0.31 |
32 | 36.00 | 1.32 | 1.38 | 2.69 | 32.62 | 32.06 | 33.75 | 34.50 | 48 | 3⁄4 | 5⁄8 | 0.31 |
34 | 38.00 | 1.32 | 1.44 | 2.82 | 34.62 | 34.06 | 35.75 | 36.50 | 52 | 3⁄4 | 5⁄8 | 0.31 |
36 | 40.69 | 1.38 | 1.61 | 3.32 | 36.81 | 36.06 | 38.00 | 39.06 | 40 | 7⁄8 | 3⁄4 | 0.38 |
38 | 42.69 | 1.44 | 1.69 | 3.44 | 38.81 | 38.06 | 40.00 | 41.06 | 40 | 7⁄8 | 3⁄4 | 0.38 |
40 | 44.69 | 1.44 | 1.69 | 3.57 | 40.81 | 40.06 | 42.00 | 43.06 | 44 | 7⁄8 | 3⁄4 | 0.38 |
42 | 46.69 | 1.50 | 1.82 | 3.69 | 42.81 | 42.06 | 44.00 | 45.06 | 48 | 7⁄8 | 3⁄4 | 0.38 |
44 | 49.25 | 1.63 | 1.88 | 4.07 | 44.88 | 44.06 | 46.25 | 47.38 | 36 | 1 | 7⁄8 | 0.38 |
46 | 51.25 | 1.69 | 1.94 | 4.19 | 46.88 | 46.06 | 48.25 | 49.38 | 40 | 1 | 7⁄8 | 0.38 |
48 | 53.25 | 1.75 | 2.07 | 4.32 | 48.88 | 48.06 | 50.25 | 51.38 | 44 | 1 | 7⁄8 | 0.38 |
50 | 55.25 | 1.82 | 2.13 | 4.50 | 50.94 | 50.06 | 52.25 | 53.38 | 44 | 1 | 7⁄8 | 0.38 |
52 | 57.38 | 1.82 | 2.19 | 4.69 | 52.94 | 52.06 | 54.25 | 55.50 | 48 | 1 | 7⁄8 | 0.38 |
54 | 59.38 | 1.88 | 2.32 | 4.88 | 55.00 | 54.06 | 56.25 | 57.50 | 48 | 1 | 7⁄8 | 0.38 |
56 | 62.00 | 1.94 | 2.38 | 5.25 | 57.12 | 56.06 | 58.50 | 59.88 | 40 | 11⁄8 | 1 | 0.44 |
58 | 64.00 | 2.00 | 2.44 | 5.38 | 59.12 | 58.06 | 60.50 | 61.88 | 44 | 11⁄8 | 1 | 0.44 |
60 | 66.00 | 2.13 | 2.57 | 5.63 | 61.12 | 60.06 | 62.50 | 63.88 | 44 | 11⁄8 | 1 | 0.44 |
Nominal Size | Outside Diameter (OD) | Min. Thickness [Note1] – WNF (tf) | Min. Thickness [Note1] – Blind (tf) | Length Through Hub (Y) | Hub Dia. Base [Note2] (X) | Hub Dia. Top (A) | Raised Face Dia. (R) | Drilling – Bolt Circle Dia. | Drilling – No. of Bolt Holes | Drilling – Dia. of Bolt Hole | Dia. of Bolt | Min. Fillet Radius (r1) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
26 | 30.94 | 1.57 | 1.69 | 3.44 | 26.94 | 26.06 | 28.00 | 29.31 | 36 | 7⁄8 | 3⁄4 | 0.38 |
28 | 32.94 | 1.69 | 1.82 | 3.69 | 28.94 | 28.06 | 30.00 | 31.31 | 40 | 7⁄8 | 3⁄4 | 0.38 |
30 | 34.94 | 1.69 | 1.94 | 3.88 | 31.00 | 30.06 | 32.00 | 33.31 | 44 | 7⁄8 | 3⁄4 | 0.38 |
32 | 37.06 | 1.75 | 2.07 | 4.19 | 33.06 | 32.06 | 34.00 | 35.44 | 48 | 7⁄8 | 3⁄4 | 0.38 |
34 | 39.56 | 1.88 | 2.19 | 4.28 | 35.12 | 34.06 | 36.25 | 37.69 | 40 | 1 | 7⁄8 | 0.38 |
36 | 41.62 | 2.00 | 2.25 | 4.57 | 37.19 | 36.06 | 38.25 | 39.75 | 44 | 1 | 7⁄8 | 0.38 |
38 | 44.25 | 2.07 | 2.44 | 4.82 | 39.25 | 38.12 | 40.25 | 42.12 | 40 | 11⁄8 | 1 | 0.38 |
40 | 46.25 | 2.13 | 2.57 | 5.00 | 41.31 | 40.12 | 42.50 | 44.12 | 44 | 11⁄8 | 1 | 0.38 |
42 | 48.25 | 2.25 | 2.63 | 5.19 | 43.38 | 42.12 | 44.50 | 46.12 | 48 | 11⁄8 | 1 | 0.44 |
44 | 50.25 | 2.32 | 2.75 | 5.32 | 45.38 | 44.12 | 46.50 | 48.12 | 52 | 11⁄8 | 1 | 0.44 |
46 | 52.81 | 2.38 | 2.88 | 5.63 | 47.44 | 46.12 | 48.62 | 50.56 | 40 | 11⁄4 | 11⁄8 | 0.44 |
48 | 54.81 | 2.50 | 3.00 | 5.82 | 48.50 | 48.12 | 50.75 | 52.56 | 44 | 11⁄4 | 11⁄8 | 0.44 |
50 | 56.81 | 2.63 | 3.13 | 6.00 | 51.50 | 50.12 | 52.75 | 54.56 | 48 | 11⁄4 | 11⁄8 | 0.44 |
52 | 58.81 | 2.69 | 3.25 | 6.13 | 53.56 | 52.12 | 54.75 | 56.56 | 52 | 11⁄4 | 11⁄8 | 0.44 |
54 | 61.00 | 2.75 | 3.38 | 6.32 | 55.62 | 54.12 | 56.75 | 58.75 | 56 | 11⁄4 | 11⁄8 | 0.44 |
56 | 63.00 | 2.82 | 3.50 | 6.50 | 57.69 | 56.12 | 58.75 | 60.75 | 60 | 11⁄4 | 11⁄8 | 0.56 |
58 | 65.94 | 2.88 | 3.62 | 6.82 | 59.69 | 58.12 | 60.75 | 63.44 | 48 | 13⁄8 | 11⁄4 | 0.56 |
60 | 67.94 | 2.94 | 3.75 | 7.00 | 61.81 | 60.12 | 63.00 | 65.44 | 52 | 13⁄8 | 11⁄4 | 0.56 |
Find the largest ready stock of Series B Flanges, Check Availability of ASME B16.47 Series B Threaded Flanges, Series B RF Flanges Supplier, ASME B16.47 Series B Reducing Flanges Stockist, Series B Class 150 Slip On Flanges Dealer, Series B Flange Price List, Series B Forged Flanges in Mumbai, India.
Nominal Size | Outside Diameter (OD) | Min. Thickness [Note1] – WNF (tf) | Min. Thickness [Note1] – Blind (tf) | Length Through Hub (Y) | Hub Dia. Base [Note2] (X) | Hub Dia. Top (A) | Raised Face Dia. (R) | Drilling – Bolt Circle Dia. | Drilling – No. of Bolt Holes | Drilling – Dia. of Bolt Hole | Dia. of Bolt | Min. Fillet Radius (r1) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
26 | 34.12 | 3.44 | 3.44 | 5.63 | 27.62 | 26.19 | 29.00 | 31.62 | 32 | 13⁄8 | 11⁄4 | 0.56 |
28 | 36.25 | 3.44 | 3.44 | 5.81 | 29.75 | 28.19 | 31.00 | 33.75 | 36 | 13⁄8 | 11⁄4 | 0.56 |
30 | 39.00 | 3.63 | 3.63 | 6.16 | 32.00 | 30.25 | 33.25 | 36.25 | 36 | 11⁄2 | 13⁄8 | 0.56 |
32 | 41.50 | 4.00 | 4.00 | 6.56 | 34.00 | 32.35 | 35.50 | 38.50 | 32 | 15⁄8 | 11⁄2 | 0.62 |
34 | 43.62 | 4.00 | 4.00 | 6.75 | 36.12 | 34.25 | 37.50 | 40.62 | 36 | 15⁄8 | 11⁄2 | 0.62 |
36 | 46.12 | 4.00 | 4.00 | 7.06 | 38.00 | 36.25 | 39.75 | 42.88 | 32 | 13⁄4 | 15⁄8 | 0.62 |
38 | 48.12 | 4.31 | 4.31 | 7.50 | 40.00 | 38.25 | 41.75 | 44.88 | 36 | 13⁄4 | 15⁄8 | 0.62 |
40 | 50.12 | 4.50 | 4.50 | 7.75 | 42.00 | 40.25 | 43.88 | 46.88 | 40 | 13⁄4 | 15⁄8 | 0.62 |
42 | 52.50 | 4.63 | 4.63 | 8.00 | 44.00 | 42.31 | 46.00 | 49.00 | 36 | 17⁄8 | 13⁄4 | 0.62 |
44 | 54.50 | 4.94 | 4.94 | 8.38 | 46.19 | 44.31 | 48.00 | 51.00 | 40 | 17⁄8 | 13⁄4 | 0.62 |
46 | 57.50 | 5.00 | 5.06 | 8.69 | 48.38 | 46.31 | 50.00 | 53.75 | 36 | 2 | 17⁄8 | 0.62 |
48 | 59.50 | 5.00 | 5.25 | 8.75 | 50.31 | 48.31 | 52.25 | 55.75 | 40 | 2 | 17⁄8 | 0.62 |
50 | 61.50 | 5.38 | 5.44 | 9.19 | 52.38 | 50.31 | 54.25 | 57.75 | 44 | 2 | 17⁄8 | 0.62 |
52 | 63.50 | 5.56 | 5.61 | 9.50 | 54.44 | 52.31 | 56.25 | 59.75 | 48 | 2 | 17⁄8 | 0.62 |
54 | 65.88 | 5.32 | 5.81 | 9.38 | 56.50 | 54.31 | 58.25 | 62.12 | 48 | 2 | 17⁄8 | 0.62 |
56 | 69.50 | 6.00 | 6.12 | 10.50 | 58.81 | 56.31 | 60.50 | 65.00 | 36 | 23⁄8 | 21⁄4 | 0.69 |
58 | 71.94 | 6.00 | 6.31 | 10.75 | 60.94 | 58.31 | 62.75 | 67.44 | 40 | 23⁄8 | 21⁄4 | 0.69 |
60 | 73.94 | 5.88 | 6.50 | 10.63 | 62.94 | 60.31 | 65.00 | 69.44 | 40 | 23⁄8 | 21⁄4 | 0.69 |
Nominal Size | Outside Diameter (OD) | Min. Thickness [Note1] – WNF (tf) | Min. Thickness [Note1] – Blind (tf) | Length Through Hub (Y) | Hub Dia. Base [Note2] (X) | Hub Dia. Top (A) | Raised Face Dia. (R) | Drilling – Bolt Circle Dia. | Drilling – No. of Bolt Holes | Drilling – Dia. of Bolt Hole | Dia. of Bolt | Min. Fillet Radius (r1) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
26 | 33.50 | 3.50 | 3.50 | 5.88 | 27.12 | 26.00 | 28.00 | 30.75 | 28 | 11⁄2 | 13⁄8 | 0.44 |
28 | 36.00 | 3.75 | 3.75 | 6.25 | 29.12 | 28.00 | 30.00 | 33.00 | 24 | 15⁄8 | 11⁄2 | 0.50 |
30 | 38.25 | 4.00 | 4.00 | 6.69 | 31.25 | 30.00 | 32.25 | 35.25 | 28 | 15⁄8 | 11⁄2 | 0.50 |
32 | 40.75 | 4.25 | 4.25 | 7.06 | 33.25 | 32.00 | 34.38 | 37.50 | 28 | 13⁄4 | 15⁄8 | 0.50 |
34 | 42.75 | 4.38 | 4.38 | 7.38 | 35.38 | 34.00 | 36.50 | 39.50 | 32 | 13⁄4 | 15⁄8 | 0.56 |
36 | 45.50 | 4.69 | 4.69 | 7.88 | 37.50 | 36.00 | 38.62 | 42.00 | 28 | 17⁄8 | 13⁄4 | 0.56 |
38 | 47.50 | 4.88 | 4.88 | 8.12 | 39.50 | 38.00 | 40.75 | 44.00 | 32 | 17⁄8 | 13⁄4 | 0.56 |
40 | 50.00 | 5.12 | 5.12 | 8.50 | 41.50 | 40.00 | 43.00 | 46.25 | 32 | 2 | 17⁄8 | 0.56 |
42 | 52.00 | 5.25 | 5.25 | 8.81 | 43.62 | 42.00 | 45.00 | 48.25 | 32 | 2 | 17⁄8 | 0.56 |
44 | 54.50 | 5.50 | 5.50 | 9.18 | 45.62 | 44.00 | 47.25 | 50.50 | 32 | 21⁄8 | 2 | 0.56 |
46 | 56.75 | 5.75 | 5.75 | 9.62 | 47.75 | 46.00 | 49.50 | 52.75 | 36 | 21⁄8 | 2 | 0.56 |
48 | 59.50 | 6.00 | 6.00 | 10.12 | 49.88 | 48.00 | 51.50 | 55.25 | 28 | 23⁄8 | 21⁄4 | 0.56 |
50 | 61.75 | 6.19 | 6.25 | 10.56 | 52.00 | 50.00 | 53.62 | 57.50 | 32 | 23⁄8 | 21⁄4 | 0.56 |
52 | 63.75 | 6.38 | 6.44 | 10.88 | 54.00 | 52.00 | 55.62 | 59.50 | 32 | 23⁄8 | 21⁄4 | 0.56 |
54 | 67.00 | 6.69 | 6.75 | 11.38 | 56.12 | 54.00 | 57.88 | 62.25 | 28 | 25⁄8 | 21⁄2 | 0.56 |
56 | 69.00 | 6.88 | 6.94 | 11.75 | 58.25 | 56.00 | 60.12 | 64.25 | 32 | 25⁄8 | 21⁄2 | 0.56 |
58 | 71.00 | 7.00 | 7.12 | 12.06 | 60.25 | 58.00 | 62.12 | 66.25 | 32 | 25⁄8 | 21⁄2 | 0.56 |
60 | 74.25 | 7.31 | 7.44 | 12.56 | 62.38 | 60.00 | 64.38 | 69.00 | 32 | 27⁄8 | 23⁄4 | 0.56 |
Nominal Size | Outside Diameter (OD) | Min. Thickness [Note1] – WNF (tf) | Min. Thickness [Note1] – Blind (tf) | Length Through Hub (Y) | Hub Dia. Base [Note2] (X) | Hub Dia. Top (A) | Raised Face Dia. (R) | Drilling – Bolt Circle Dia. | Drilling – No. of Bolt Holes | Drilling – Dia. of Bolt Hole | Dia. of Bolt | Min. Fillet Radius (r1) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
26 | 35.00 | 4.38 | 4.38 | 7.12 | 27.50 | 26.00 | 28.62 | 31.75 | 28 | 13⁄4 | 15⁄8 | 0.50 |
28 | 37.50 | 4.56 | 4.56 | 7.50 | 29.62 | 28.00 | 30.88 | 34.00 | 28 | 17⁄8 | 13⁄4 | 0.50 |
30 | 40.25 | 4.94 | 5.00 | 8.06 | 31.75 | 30.00 | 33.12 | 36.50 | 28 | 2 | 17⁄8 | 0.50 |
32 | 42.75 | 5.12 | 5.31 | 8.50 | 33.88 | 32.00 | 35.25 | 38.75 | 28 | 21⁄8 | 2 | 0.50 |
34 | 45.75 | 5.56 | 5.68 | 9.19 | 36.00 | 34.00 | 37.50 | 41.50 | 24 | 23⁄8 | 21⁄4 | 0.56 |
36 | 47.75 | 5.75 | 5.94 | 9.56 | 38.12 | 36.00 | 39.75 | 43.50 | 28 | 23⁄8 | 21⁄4 | 0.56 |
38 | 50.00 | 6.00 | 6.12 | 10.00 | 40.25 | 38.00 | 41.50 | 45.75 | 28 | 23⁄8 | 21⁄4 | 0.56 |
40 | 52.00 | 6.25 | 6.38 | 10.38 | 42.25 | 40.00 | 43.75 | 47.75 | 32 | 23⁄8 | 21⁄4 | 0.56 |
42 | 55.25 | 6.62 | 6.75 | 11.00 | 44.38 | 42.00 | 46.00 | 50.50 | 28 | 25⁄8 | 21⁄2 | 0.56 |
44 | 57.25 | 6.81 | 7.00 | 11.38 | 46.50 | 44.00 | 48.25 | 52.50 | 32 | 25⁄8 | 21⁄2 | 0.56 |
46 | 59.50 | 7.06 | 7.31 | 11.81 | 48.62 | 46.00 | 50.25 | 54.75 | 32 | 25⁄8 | 21⁄2 | 0.56 |
48 | 62.75 | 7.44 | 7.69 | 12.44 | 50.75 | 48.00 | 52.25 | 57.50 | 32 | 27⁄8 | 23⁄4 | 0.56 |
50 | 65.75 | 7.75 | 8.00 | 12.94 | 52.88 | 50.00 | 54.50 | 60.00 | 28 | 31⁄8 | 3 | 0.56 |
52 | 67.75 | 8.00 | 8.25 | 13.25 | 54.88 | 52.00 | 56.50 | 62.00 | 32 | 31⁄8 | 3 | 0.56 |
54 | 70.00 | 8.25 | 8.56 | 13.75 | 57.00 | 54.00 | 58.75 | 64.25 | 32 | 31⁄8 | 3 | 0.56 |
56 | 73.00 | 8.56 | 8.88 | 14.25 | 59.12 | 56.00 | 60.75 | 66.75 | 32 | 33⁄8 | 31⁄4 | 0.62 |
58 | 75.00 | 8.75 | 9.12 | 14.56 | 61.12 | 58.00 | 63.00 | 68.75 | 32 | 33⁄8 | 31⁄4 | 0.62 |
60 | 78.50 | 9.19 | 9.56 | 15.31 | 63.38 | 60.00 | 65.25 | 71.75 | 28 | 35⁄8 | 31⁄2 | 0.69 |
Nominal Size | Outside Diameter (OD) | Min. Thickness [Note1] – WNF (tf) | Min. Thickness [Note1] – Blind (tf) | Length Through Hub (Y) | Hub Dia. Base [Note2] (X) | Hub Dia. Top (A) | Raised Face Dia. (R) | Drilling – Bolt Circle Dia. | Drilling – No. of Bolt Holes | Drilling – Dia. of Bolt Hole | Dia. of Bolt | Min. Fillet Radius (r1) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
26 | 40.25 | 5.31 | 6.06 | 10.19 | 29.25 | 26.00 | 30.00 | 35.50 | 20 | 25⁄8 | 21⁄2 | 0.44 |
28 | 43.50 | 5.81 | 6.56 | 10.88 | 31.38 | 28.00 | 32.25 | 38.25 | 20 | 27⁄8 | 23⁄4 | 0.50 |
30 | 46.50 | 6.12 | 6.93 | 11.38 | 33.50 | 30.00 | 34.50 | 40.75 | 20 | 31⁄8 | 3 | 0.50 |
32 | 48.75 | 6.31 | 7.31 | 11.94 | 35.75 | 32.00 | 36.50 | 43.00 | 20 | 31⁄8 | 3 | 0.50 |
34 | 51.75 | 6.75 | 7.68 | 12.56 | 37.88 | 34.00 | 39.00 | 45.50 | 20 | 33⁄8 | 31⁄4 | 0.56 |
36 | 53.00 | 6.81 | 7.94 | 12.81 | 40.00 | 36.00 | 40.50 | 47.25 | 24 | 31⁄8 | 3 | 0.56 |
38 | 57.50 | 7.50 | 8.50 | 13.88 | 42.25 | 38.00 | 43.25 | 50.75 | 20 | 35⁄8 | 31⁄2 | 0.75 |
40 | 59.50 | 7.75 | 8.81 | 14.31 | 44.38 | 40.00 | 45.75 | 52.75 | 24 | 35⁄8 | 31⁄2 | 0.81 |
42 | 61.50 | 8.12 | 9.12 | 14.62 | 46.31 | 42.00 | 47.75 | 54.75 | 24 | 35⁄8 | 31⁄2 | 0.81 |
44 | 64.88 | 8.44 | 9.56 | 15.38 | 48.62 | 44.00 | 50.00 | 57.62 | 24 | 37⁄8 | 33⁄4 | 0.88 |
46 | 68.25 | 8.88 | 10.06 | 16.18 | 50.88 | 46.00 | 52.50 | 60.50 | 24 | 41⁄8 | 4 | 0.88 |
48 | 70.25 | 9.19 | 10.38 | 16.50 | 52.88 | 48.00 | 54.50 | 62.50 | 24 | 41⁄8 | 4 | 0.94 |
Best quality Series B Flanges, Series B Class 400 Groove Flange, Series B Flanges Facing Type & Finish, Series B Weldoflange, Series B Square Flange, View Specification Of Series B Orifice Flange, Series B RTJ Flange, ASME B16.47 Series B langes Raised Face, ANSI B16.47 Series B Nipoflange, Series B Flanges Price, Series B Expander Flanges at Best Price.
Series B Flanges Applications
-
Petrochemical Industries
-
Pharmaceutical Equipment
-
Power Generation
-
Heating Systems and Heat Exchanger
-
Pulp and Paper Industry
-
Mining Support
-
Chemical Equipment
-
Gas Processing
-
Plumbing
-
Nuclear Power Systems
-
Condensers
-
Sea Water Equipment
-
Buildings and Bridges
-
Industrial Water Lines
-
Food Processing Industry
-
Fire Protection Systems
-
Off-Shore Oil Drilling Companies
-
Australia, Afghanistan, Algeria, Angola, Argentina, Armenia, Azerbaijan, Bahrain, Bangladesh, Benin,
Bhutan, Botswana, Brazil, Brunei, Burkina Faso, Cambodia, Cameroon, Canada, Central Africa Republic,
Chad, Chile, Colombia, Cuba, Cyprus, DRC, Djibouti, Egypt, Equatorial Guinea, Eritrea, Eswatini,
Ethiopia, Fiji, Finland, France, Georgia, Germany, Ghana, Greece, Hungary, Iceland, Indonesia, Iran,
Iraq, Ireland, Israel, Italy, Japan, Jordan, Kazakhstan, Kenya, Kuwait, Kyrgyzstan, Laos, Lebanon,
Lesotho, Liberia, Libya, Lithuania, Madagascar, Malawi, Malaysia, Maldives, Mali, Mexico, Morocco,
Mozambique, Mauritania, Myanmar, Namibia, Nepal, Netherlands, New Zealand, Nigeria, Norway, Oman,
Panama, Peru, Philippines, Poland, Portugal, Palestine, Qatar, Russia, Rwanda, Romania, Saudi Arabia,
Senegal, Sierra Leone, Singapore, Slovakia, Somalia, South Africa, South Korea, South Sudan, Spain,
Sri Lanka, Sweden, Switzerland, Syria, Taiwan, Tajikistan, Tanzania, Tasmania, Thailand, The Gambia,
Timor-Leste, Togo, Tunisia, Turkey, Turkiye, Turkmenistan, Uganda, Uzbekistan, United Arab Emirates (UAE),
United Kingdom (UK), United States (US), Venezuela, Vietnam, Yemen, Zambia, Zimbabwe
Abu Dhabi, Amsterdam, Abuja, Accra, Addis Ababa, Ahmedabad, Algiers, Amman, Ankara, Antananarivo,
Ashgabat, Asmara, Astana, Athens, Baghdad, Baku, Bamako, Bandar Seri Begawan, Bangkok, Bangui,
Banjul, Beirut, Bengaluru, Berlin, Bishkek, Bloemfontein, Bogotá, Bern, Brasília, Bratislava,
Bucharest, Budapest, Buenos Aires, Cairo, Canberra, Cape Town, Caracas, Chennai, Coimbatore, Dakar,
Damascus, Dhaka, Dili, Djibouti city, Dodoma, Doha, Dublin, Dushanbe, Freetown, Gaborone, Ghaziabad,
Guwahati, Hanoi, Harare, Havana, Helsinki, Hobart, Hyderabad, Indore, Jaipur, Jakarta, Jerusalem,
Juba, Jurong East, Kabul, Kampala, Kanpur, Kathmandu, Kigali, Kinshasa, Kochi, Kolkata, Kuala Lumpur,
Kuwait City, Lisbon, Lilongwe, Lima, Lobamba, Lomé, London, Luanda, Lucknow, Lusaka, Malabo, Madrid,
Malé, Mexico City, Manama, Moscow, Manila, Maputo, Maseru, Mbabane, Mogadishu, Monrovia, Mumabi,
Muscat, Nagpur, Nairobi, New Delhi, Niamey, Nicosia, Noida, Nouakchott, N’Djamena, Oslo, Ottawa,
Ouagadougou, Panama City, Paris, Patna, Phnom Penh, Porto-Novo, Pretoria, Pune, Rabat, Reykjavík,
Riyadh, Rome, Sana’a, Santiago, Sri Jayawardenepura Kotte, Stockholm, Seoul, Singapore, Surat,
Suva, Taipei City, Tashkent, Tokyo, Tbilisi, Tehran, Thimphu, Tripoli, Tunis, Vientiane, Vilnius,
Visakhapatnam, Warsaw, Washington D.C., Wellington, Windhoek, Yaoundé, Yerevan, Naypyidaw