Series B Flanges, ANSI B16.47 Series B Flange

Series B weld neck Flange, Series B Plate Flange, Series B slip on Flanges Supplier, ANSI B16.47 Series B Threaded Flanges, ANSI B16.47 Series B Class 300 Socket Weld Flanges, Series B Spectacle blind Flanges Manufacturer in India.

A Series B flange refers to a specific type of flange used in piping and plumbing systems. It is a type of raised face flange that conforms to the ASME B16.47 standard, which specifies dimensions and tolerances for flanges in a range of sizes and pressure classes.

The Series B flange is designed for use in applications that require higher pressure ratings than those covered by Series A flanges. It is typically used in large diameter piping systems and is available in sizes ranging from 26 inches to 60 inches.

Series B flanges are commonly used in the oil and gas, petrochemical, and power generation industries, among others. They are typically made from materials such as carbon steel, stainless steel, or alloy steel, depending on the specific application requirements.

Specifications Dimensions Applications

Suppliers of Series B Welding Neck Flange, Check Sizes And Dimensions Of Series B Forged Flanges, Ready Stock of Series B Socket Weld Flange, ASME B16.47 Class 300 Series B Ring Type Joint Orifice Flange, ANSI B16.47 Series B Blind Flanges.

Series B Flange Specifications

Size Range

1/2" (15 NB) to 48" (1200NB) DN10~DN5000

Class / Pressure Rating

150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.

Standards / Dimensions

ANSI/ASME B16.5, B16.36, B16.48, BS4504, BS 10, EN-1092, DIN, BS, GOST, MSS SP-44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605

Connection Type

Ring Joint Flange (RTJ), Flat Face Flange (FF), Raised Face Flange (RF), Male and Female Flange (M & F), Lap Joint Flange, Large and Small Tongue-and-Groove Flange (T & G)

Series B Flanges Dimensions

ASME B16.47 Series B Class 75 Flange Dimenisons	ASME B16.47 Series B Class 150 Flange Dimenisons
ASME B16.47 Series B Class 300 Flange Dimenisons	ASME B16.47 Series B Class 400 Flange Dimenisons
ASME B16.47 Series B Class 600 Flange Dimenisons	ASME B16.47 Series B Class 900 Flange Dimenisons

ASME B16.47 SERIES B CLASS 75 FLANGE DIMENSIONS

Nominal Size	Outside Diameter (OD)	Min. Thickness [Note1] – WNF (tf)	Min. Thickness [Note1] – Blind (tf)	Length Through Hub (Y)	Hub Dia. Base [Note2] (X)	Hub Dia. Top (A)	Raised Face Dia. (R)	Drilling – Bolt Circle Dia.	Drilling – No. of Bolt Holes	Drilling – Dia. of Bolt Hole	Dia. of Bolt	Min. Fillet Radius (r1)
26	30.00	1.25	1.25	2.25	26.62	26.06	27.75	28.50	36	3⁄4	5⁄8	0.31
28	32.00	1.25	1.25	2.38	28.62	28.06	29.75	30.50	40	3⁄4	5⁄8	0.31
30	34.00	1.25	1.25	2.50	30.62	30.06	31.75	32.50	44	3⁄4	5⁄8	0.31
32	36.00	1.32	1.38	2.69	32.62	32.06	33.75	34.50	48	3⁄4	5⁄8	0.31
34	38.00	1.32	1.44	2.82	34.62	34.06	35.75	36.50	52	3⁄4	5⁄8	0.31
36	40.69	1.38	1.61	3.32	36.81	36.06	38.00	39.06	40	7⁄8	3⁄4	0.38
38	42.69	1.44	1.69	3.44	38.81	38.06	40.00	41.06	40	7⁄8	3⁄4	0.38
40	44.69	1.44	1.69	3.57	40.81	40.06	42.00	43.06	44	7⁄8	3⁄4	0.38
42	46.69	1.50	1.82	3.69	42.81	42.06	44.00	45.06	48	7⁄8	3⁄4	0.38
44	49.25	1.63	1.88	4.07	44.88	44.06	46.25	47.38	36	1	7⁄8	0.38
46	51.25	1.69	1.94	4.19	46.88	46.06	48.25	49.38	40	1	7⁄8	0.38
48	53.25	1.75	2.07	4.32	48.88	48.06	50.25	51.38	44	1	7⁄8	0.38
50	55.25	1.82	2.13	4.50	50.94	50.06	52.25	53.38	44	1	7⁄8	0.38
52	57.38	1.82	2.19	4.69	52.94	52.06	54.25	55.50	48	1	7⁄8	0.38
54	59.38	1.88	2.32	4.88	55.00	54.06	56.25	57.50	48	1	7⁄8	0.38
56	62.00	1.94	2.38	5.25	57.12	56.06	58.50	59.88	40	11⁄8	1	0.44
58	64.00	2.00	2.44	5.38	59.12	58.06	60.50	61.88	44	11⁄8	1	0.44
60	66.00	2.13	2.57	5.63	61.12	60.06	62.50	63.88	44	11⁄8	1	0.44

ASME B16.47 SERIES B CLASS 150 FLANGE DIMENSIONS

Nominal Size	Outside Diameter (OD)	Min. Thickness [Note1] – WNF (tf)	Min. Thickness [Note1] – Blind (tf)	Length Through Hub (Y)	Hub Dia. Base [Note2] (X)	Hub Dia. Top (A)	Raised Face Dia. (R)	Drilling – Bolt Circle Dia.	Drilling – No. of Bolt Holes	Drilling – Dia. of Bolt Hole	Dia. of Bolt	Min. Fillet Radius (r1)
26	30.94	1.57	1.69	3.44	26.94	26.06	28.00	29.31	36	7⁄8	3⁄4	0.38
28	32.94	1.69	1.82	3.69	28.94	28.06	30.00	31.31	40	7⁄8	3⁄4	0.38
30	34.94	1.69	1.94	3.88	31.00	30.06	32.00	33.31	44	7⁄8	3⁄4	0.38
32	37.06	1.75	2.07	4.19	33.06	32.06	34.00	35.44	48	7⁄8	3⁄4	0.38
34	39.56	1.88	2.19	4.28	35.12	34.06	36.25	37.69	40	1	7⁄8	0.38
36	41.62	2.00	2.25	4.57	37.19	36.06	38.25	39.75	44	1	7⁄8	0.38
38	44.25	2.07	2.44	4.82	39.25	38.12	40.25	42.12	40	11⁄8	1	0.38
40	46.25	2.13	2.57	5.00	41.31	40.12	42.50	44.12	44	11⁄8	1	0.38
42	48.25	2.25	2.63	5.19	43.38	42.12	44.50	46.12	48	11⁄8	1	0.44
44	50.25	2.32	2.75	5.32	45.38	44.12	46.50	48.12	52	11⁄8	1	0.44
46	52.81	2.38	2.88	5.63	47.44	46.12	48.62	50.56	40	11⁄4	11⁄8	0.44
48	54.81	2.50	3.00	5.82	48.50	48.12	50.75	52.56	44	11⁄4	11⁄8	0.44
50	56.81	2.63	3.13	6.00	51.50	50.12	52.75	54.56	48	11⁄4	11⁄8	0.44
52	58.81	2.69	3.25	6.13	53.56	52.12	54.75	56.56	52	11⁄4	11⁄8	0.44
54	61.00	2.75	3.38	6.32	55.62	54.12	56.75	58.75	56	11⁄4	11⁄8	0.44
56	63.00	2.82	3.50	6.50	57.69	56.12	58.75	60.75	60	11⁄4	11⁄8	0.56
58	65.94	2.88	3.62	6.82	59.69	58.12	60.75	63.44	48	13⁄8	11⁄4	0.56
60	67.94	2.94	3.75	7.00	61.81	60.12	63.00	65.44	52	13⁄8	11⁄4	0.56

Find the largest ready stock of Series B Flanges, Check Availability of ASME B16.47 Series B Threaded Flanges, Series B RF Flanges Supplier, ASME B16.47 Series B Reducing Flanges Stockist, Series B Class 150 Slip On Flanges Dealer, Series B Flange Price List, Series B Forged Flanges in Mumbai, India.

ASME B16.47 SERIES B CLASS 300 FLANGE DIMENSIONS

Nominal Size	Outside Diameter (OD)	Min. Thickness [Note1] – WNF (tf)	Min. Thickness [Note1] – Blind (tf)	Length Through Hub (Y)	Hub Dia. Base [Note2] (X)	Hub Dia. Top (A)	Raised Face Dia. (R)	Drilling – Bolt Circle Dia.	Drilling – No. of Bolt Holes	Drilling – Dia. of Bolt Hole	Dia. of Bolt	Min. Fillet Radius (r1)
26	34.12	3.44	3.44	5.63	27.62	26.19	29.00	31.62	32	13⁄8	11⁄4	0.56
28	36.25	3.44	3.44	5.81	29.75	28.19	31.00	33.75	36	13⁄8	11⁄4	0.56
30	39.00	3.63	3.63	6.16	32.00	30.25	33.25	36.25	36	11⁄2	13⁄8	0.56
32	41.50	4.00	4.00	6.56	34.00	32.35	35.50	38.50	32	15⁄8	11⁄2	0.62
34	43.62	4.00	4.00	6.75	36.12	34.25	37.50	40.62	36	15⁄8	11⁄2	0.62
36	46.12	4.00	4.00	7.06	38.00	36.25	39.75	42.88	32	13⁄4	15⁄8	0.62
38	48.12	4.31	4.31	7.50	40.00	38.25	41.75	44.88	36	13⁄4	15⁄8	0.62
40	50.12	4.50	4.50	7.75	42.00	40.25	43.88	46.88	40	13⁄4	15⁄8	0.62
42	52.50	4.63	4.63	8.00	44.00	42.31	46.00	49.00	36	17⁄8	13⁄4	0.62
44	54.50	4.94	4.94	8.38	46.19	44.31	48.00	51.00	40	17⁄8	13⁄4	0.62
46	57.50	5.00	5.06	8.69	48.38	46.31	50.00	53.75	36	2	17⁄8	0.62
48	59.50	5.00	5.25	8.75	50.31	48.31	52.25	55.75	40	2	17⁄8	0.62
50	61.50	5.38	5.44	9.19	52.38	50.31	54.25	57.75	44	2	17⁄8	0.62
52	63.50	5.56	5.61	9.50	54.44	52.31	56.25	59.75	48	2	17⁄8	0.62
54	65.88	5.32	5.81	9.38	56.50	54.31	58.25	62.12	48	2	17⁄8	0.62
56	69.50	6.00	6.12	10.50	58.81	56.31	60.50	65.00	36	23⁄8	21⁄4	0.69
58	71.94	6.00	6.31	10.75	60.94	58.31	62.75	67.44	40	23⁄8	21⁄4	0.69
60	73.94	5.88	6.50	10.63	62.94	60.31	65.00	69.44	40	23⁄8	21⁄4	0.69

ASME B16.47 SERIES B CLASS 400 FLANGE DIMENSIONS

Nominal Size	Outside Diameter (OD)	Min. Thickness [Note1] – WNF (tf)	Min. Thickness [Note1] – Blind (tf)	Length Through Hub (Y)	Hub Dia. Base [Note2] (X)	Hub Dia. Top (A)	Raised Face Dia. (R)	Drilling – Bolt Circle Dia.	Drilling – No. of Bolt Holes	Drilling – Dia. of Bolt Hole	Dia. of Bolt	Min. Fillet Radius (r1)
26	33.50	3.50	3.50	5.88	27.12	26.00	28.00	30.75	28	11⁄2	13⁄8	0.44
28	36.00	3.75	3.75	6.25	29.12	28.00	30.00	33.00	24	15⁄8	11⁄2	0.50
30	38.25	4.00	4.00	6.69	31.25	30.00	32.25	35.25	28	15⁄8	11⁄2	0.50
32	40.75	4.25	4.25	7.06	33.25	32.00	34.38	37.50	28	13⁄4	15⁄8	0.50
34	42.75	4.38	4.38	7.38	35.38	34.00	36.50	39.50	32	13⁄4	15⁄8	0.56
36	45.50	4.69	4.69	7.88	37.50	36.00	38.62	42.00	28	17⁄8	13⁄4	0.56
38	47.50	4.88	4.88	8.12	39.50	38.00	40.75	44.00	32	17⁄8	13⁄4	0.56
40	50.00	5.12	5.12	8.50	41.50	40.00	43.00	46.25	32	2	17⁄8	0.56
42	52.00	5.25	5.25	8.81	43.62	42.00	45.00	48.25	32	2	17⁄8	0.56
44	54.50	5.50	5.50	9.18	45.62	44.00	47.25	50.50	32	21⁄8	2	0.56
46	56.75	5.75	5.75	9.62	47.75	46.00	49.50	52.75	36	21⁄8	2	0.56
48	59.50	6.00	6.00	10.12	49.88	48.00	51.50	55.25	28	23⁄8	21⁄4	0.56
50	61.75	6.19	6.25	10.56	52.00	50.00	53.62	57.50	32	23⁄8	21⁄4	0.56
52	63.75	6.38	6.44	10.88	54.00	52.00	55.62	59.50	32	23⁄8	21⁄4	0.56
54	67.00	6.69	6.75	11.38	56.12	54.00	57.88	62.25	28	25⁄8	21⁄2	0.56
56	69.00	6.88	6.94	11.75	58.25	56.00	60.12	64.25	32	25⁄8	21⁄2	0.56
58	71.00	7.00	7.12	12.06	60.25	58.00	62.12	66.25	32	25⁄8	21⁄2	0.56
60	74.25	7.31	7.44	12.56	62.38	60.00	64.38	69.00	32	27⁄8	23⁄4	0.56

ASME B16.47 SERIES B CLASS 600 FLANGE DIMENSIONS

Nominal Size	Outside Diameter (OD)	Min. Thickness [Note1] – WNF (tf)	Min. Thickness [Note1] – Blind (tf)	Length Through Hub (Y)	Hub Dia. Base [Note2] (X)	Hub Dia. Top (A)	Raised Face Dia. (R)	Drilling – Bolt Circle Dia.	Drilling – No. of Bolt Holes	Drilling – Dia. of Bolt Hole	Dia. of Bolt	Min. Fillet Radius (r1)
26	35.00	4.38	4.38	7.12	27.50	26.00	28.62	31.75	28	13⁄4	15⁄8	0.50
28	37.50	4.56	4.56	7.50	29.62	28.00	30.88	34.00	28	17⁄8	13⁄4	0.50
30	40.25	4.94	5.00	8.06	31.75	30.00	33.12	36.50	28	2	17⁄8	0.50
32	42.75	5.12	5.31	8.50	33.88	32.00	35.25	38.75	28	21⁄8	2	0.50
34	45.75	5.56	5.68	9.19	36.00	34.00	37.50	41.50	24	23⁄8	21⁄4	0.56
36	47.75	5.75	5.94	9.56	38.12	36.00	39.75	43.50	28	23⁄8	21⁄4	0.56
38	50.00	6.00	6.12	10.00	40.25	38.00	41.50	45.75	28	23⁄8	21⁄4	0.56
40	52.00	6.25	6.38	10.38	42.25	40.00	43.75	47.75	32	23⁄8	21⁄4	0.56
42	55.25	6.62	6.75	11.00	44.38	42.00	46.00	50.50	28	25⁄8	21⁄2	0.56
44	57.25	6.81	7.00	11.38	46.50	44.00	48.25	52.50	32	25⁄8	21⁄2	0.56
46	59.50	7.06	7.31	11.81	48.62	46.00	50.25	54.75	32	25⁄8	21⁄2	0.56
48	62.75	7.44	7.69	12.44	50.75	48.00	52.25	57.50	32	27⁄8	23⁄4	0.56
50	65.75	7.75	8.00	12.94	52.88	50.00	54.50	60.00	28	31⁄8	3	0.56
52	67.75	8.00	8.25	13.25	54.88	52.00	56.50	62.00	32	31⁄8	3	0.56
54	70.00	8.25	8.56	13.75	57.00	54.00	58.75	64.25	32	31⁄8	3	0.56
56	73.00	8.56	8.88	14.25	59.12	56.00	60.75	66.75	32	33⁄8	31⁄4	0.62
58	75.00	8.75	9.12	14.56	61.12	58.00	63.00	68.75	32	33⁄8	31⁄4	0.62
60	78.50	9.19	9.56	15.31	63.38	60.00	65.25	71.75	28	35⁄8	31⁄2	0.69

ASME B16.47 SERIES B CLASS 900 FLANGE DIMENSIONS

Nominal Size	Outside Diameter (OD)	Min. Thickness [Note1] – WNF (tf)	Min. Thickness [Note1] – Blind (tf)	Length Through Hub (Y)	Hub Dia. Base [Note2] (X)	Hub Dia. Top (A)	Raised Face Dia. (R)	Drilling – Bolt Circle Dia.	Drilling – No. of Bolt Holes	Drilling – Dia. of Bolt Hole	Dia. of Bolt	Min. Fillet Radius (r1)
26	40.25	5.31	6.06	10.19	29.25	26.00	30.00	35.50	20	25⁄8	21⁄2	0.44
28	43.50	5.81	6.56	10.88	31.38	28.00	32.25	38.25	20	27⁄8	23⁄4	0.50
30	46.50	6.12	6.93	11.38	33.50	30.00	34.50	40.75	20	31⁄8	3	0.50
32	48.75	6.31	7.31	11.94	35.75	32.00	36.50	43.00	20	31⁄8	3	0.50
34	51.75	6.75	7.68	12.56	37.88	34.00	39.00	45.50	20	33⁄8	31⁄4	0.56
36	53.00	6.81	7.94	12.81	40.00	36.00	40.50	47.25	24	31⁄8	3	0.56
38	57.50	7.50	8.50	13.88	42.25	38.00	43.25	50.75	20	35⁄8	31⁄2	0.75
40	59.50	7.75	8.81	14.31	44.38	40.00	45.75	52.75	24	35⁄8	31⁄2	0.81
42	61.50	8.12	9.12	14.62	46.31	42.00	47.75	54.75	24	35⁄8	31⁄2	0.81
44	64.88	8.44	9.56	15.38	48.62	44.00	50.00	57.62	24	37⁄8	33⁄4	0.88
46	68.25	8.88	10.06	16.18	50.88	46.00	52.50	60.50	24	41⁄8	4	0.88
48	70.25	9.19	10.38	16.50	52.88	48.00	54.50	62.50	24	41⁄8	4	0.94

Best quality Series B Flanges, Series B Class 400 Groove Flange, Series B Flanges Facing Type & Finish, Series B Weldoflange, Series B Square Flange, View Specification Of Series B Orifice Flange, Series B RTJ Flange, ASME B16.47 Series B langes Raised Face, ANSI B16.47 Series B Nipoflange, Series B Flanges Price, Series B Expander Flanges at Best Price.

Series B Flanges Applications

We stock in India and export to the following countries

Australia, Afghanistan, Algeria, Angola, Argentina, Armenia, Azerbaijan, Bahrain, Bangladesh, Benin,
Bhutan, Botswana, Brazil, Brunei, Burkina Faso, Cambodia, Cameroon, Canada, Central Africa Republic,
Chad, Chile, Colombia, Cuba, Cyprus, DRC, Djibouti, Egypt, Equatorial Guinea, Eritrea, Eswatini,
Ethiopia, Fiji, Finland, France, Georgia, Germany, Ghana, Greece, Hungary, Iceland, Indonesia, Iran,
Iraq, Ireland, Israel, Italy, Japan, Jordan, Kazakhstan, Kenya, Kuwait, Kyrgyzstan, Laos, Lebanon,
Lesotho, Liberia, Libya, Lithuania, Madagascar, Malawi, Malaysia, Maldives, Mali, Mexico, Morocco,
Mozambique, Mauritania, Myanmar, Namibia, Nepal, Netherlands, New Zealand, Nigeria, Norway, Oman,
Panama, Peru, Philippines, Poland, Portugal, Palestine, Qatar, Russia, Rwanda, Romania, Saudi Arabia,
Senegal, Sierra Leone, Singapore, Slovakia, Somalia, South Africa, South Korea, South Sudan, Spain,
Sri Lanka, Sweden, Switzerland, Syria, Taiwan, Tajikistan, Tanzania, Tasmania, Thailand, The Gambia,
Timor-Leste, Togo, Tunisia, Turkey, Turkiye, Turkmenistan, Uganda, Uzbekistan, United Arab Emirates (UAE),
United Kingdom (UK), United States (US), Venezuela, Vietnam, Yemen, Zambia, Zimbabwe

We stock in Mumbai and supply to the following cities

Abu Dhabi, Amsterdam, Abuja, Accra, Addis Ababa, Ahmedabad, Algiers, Amman, Ankara, Antananarivo,
Ashgabat, Asmara, Astana, Athens, Baghdad, Baku, Bamako, Bandar Seri Begawan, Bangkok, Bangui,
Banjul, Beirut, Bengaluru, Berlin, Bishkek, Bloemfontein, Bogotá, Bern, Brasília, Bratislava,
Bucharest, Budapest, Buenos Aires, Cairo, Canberra, Cape Town, Caracas, Chennai, Coimbatore, Dakar,
Damascus, Dhaka, Dili, Djibouti city, Dodoma, Doha, Dublin, Dushanbe, Freetown, Gaborone, Ghaziabad,
Guwahati, Hanoi, Harare, Havana, Helsinki, Hobart, Hyderabad, Indore, Jaipur, Jakarta, Jerusalem,
Juba, Jurong East, Kabul, Kampala, Kanpur, Kathmandu, Kigali, Kinshasa, Kochi, Kolkata, Kuala Lumpur,
Kuwait City, Lisbon, Lilongwe, Lima, Lobamba, Lomé, London, Luanda, Lucknow, Lusaka, Malabo, Madrid,
Malé, Mexico City, Manama, Moscow, Manila, Maputo, Maseru, Mbabane, Mogadishu, Monrovia, Mumabi,
Muscat, Nagpur, Nairobi, New Delhi, Niamey, Nicosia, Noida, Nouakchott, N’Djamena, Oslo, Ottawa,
Ouagadougou, Panama City, Paris, Patna, Phnom Penh, Porto-Novo, Pretoria, Pune, Rabat, Reykjavík,
Riyadh, Rome, Sana’a, Santiago, Sri Jayawardenepura Kotte, Stockholm, Seoul, Singapore, Surat,
Suva, Taipei City, Tashkent, Tokyo, Tbilisi, Tehran, Thimphu, Tripoli, Tunis, Vientiane, Vilnius,
Visakhapatnam, Warsaw, Washington D.C., Wellington, Windhoek, Yaoundé, Yerevan, Naypyidaw

Series B Flanges Price

Omaa Metal Sources is Series B Flanges Exporters and Suppliers in the US, UK, South Africa, Saudi Arabia, Singapore, UAE, Oman, South Korea, Turkey, Bahrain, Malaysia, Philippines, Thailand, Norway, Indonesia, Iraq, Yemen, Bangladesh, Nigeria, Egypt, Peru, Ghana, Morocco, Etc.